Microbe Plus® Drip is a true fusion of biological and conventional NPK fertilisers.

It has been specifically designed for drip irrigation but can also be used as a foliar spray.

It has been blended with plant beneficial microorganisms. As microbes will digest all the nutrients in Microbe Plus Drip, they will be transformed as plant available nutrients.

Nutrients incorporated into microbial metabolisms will be prevented from leaching and eventually will be used to feed the plants on a demand basis.

As Microbe Plus Drip is blended with a comprehensive variety of macro and micronutrients, the product is suitable for all crops but it particularly suits horticulture, winter crops and pasture.

Trace elements are normally ignored in conventional agriculture, but a plant will not perform properly if an adequate ratio of both macro and micronutrients is supplied. Trace elements in Microbe Plus Drip will provide plants with an optimum nutrition that will drive a yield improvement.

Product Benefits

  • Organically chelated blend of essential trace elements combined with NPK
  • A completely balanced, microbially digested product for optimum uptake & availability
  • Available immediately through the root, leaf, and plant fruit with nil withholding period
  • Inoculates the soil with the essential beneficial microbes necessary for good soil health and structure, and that plants need for their development and productivity
  • Works through all irrigation, drip systems and foliar sprays
  • Enhanced with molasses, fulvic acid and vitamin C.

Active Ingredients

Yeast, Lactobacillus, phototrophic bacteria, Actinomycetes, proprietary cultures, fulvic acid, nitrogen, phosphorus, potassium, zinc, boron, magnesium, manganese, molybdenum, iron, copper, cobalt and vitamin C.

Produced by natural fermentation with molasses and purified water.

Microbe Plus® Drip Shelf Life

Best used within 12 months of manufacture date. However, the product can last longer if stored in the correct conditions.

Rainfastness

Microbe Plus Drip is rainfast in 15 minutes. If rain is expected shortly after applying, application rates listed can be decreased by 10%.

Compatibility & Use

Microbe Plus Drip can be mixed and applied with most commonly used herbicides and pesticides, however, we strongly recommend checking labels for compatibility as well as testing in a small area prior to widespread application.

Packaging

Microbe Plus® Drip is available in 20L and 1000L containers

Analysis (W/V)

Nutrient Form Analysis*
Nitrogen (N) as urea 4.70%
  as nitrate 0.30%
  Total 5.00%
Phosphorus (P) as water soluble 0.65%
Potassium (K) as nitrate 0.65%
  as phosphate 0.75%
  as molasses 0.10%
  Total 1.50%
Sulphur (S) as sulphate 0.75%
Magnesium (Mg) as sulphate 0.20%
Zinc (Zn) as sulphate 0.30%
Manganese (Mn) as sulphate 0.20%
Iron (Fe) as sulphate 0.0045%
Boron (B) as sodium borate 0.05%
Molybdenum (Mo) as sodium molybdate 0.01%
Cobalt (Co) as sulphate 0.0070%

*Product is microbially active so the analysis may vary between different batches.

Optimizing results

For optimum results, when using Microbe Plus Drip as foliar, use with Grow Green’s Xtend®. Xtend will maximize the result by reducing drift and increasing adherence to the sprayed surface.

Application details

Microbe Plus Drip is suitable for use in a wide range of market sectors.

Crop Application rate/ha* No. of pplications
Horticultural crops 4-5L 3-4 fertigations: pre flowering, post flowering and fruit enlargement stage
Broadacre winter crops 2-3L Liquid injection at seed sowing stage, 2 foliar applications (mid tillering and booting - grain filling stage)
Broadacre summer crops 4-5L 2-3 boom spray applications or foliar applications:pre flowering, post flowering and grain filling stage
Annual & perennial pasture 3-4L 3-4 foliar applications post grazing

*To be diluted in a minimum of 100L of water per hectare.
Foliar spray to point of run off. Pending soil and leaf analysis, application rates may vary.
The above should be used as a guide only. Halve rates if temperature during spraying is above 35C.

For information about specific market sectors or application rates, contact us on:
phone +61 7 5463 9900
OR 1800 355 913
email This email address is being protected from spambots. You need JavaScript enabled to view it.

Attachments:
FileFile sizeDownloads
Download this file (Microbe Plus DRIP Brochure_0816.pdf)Microbe Plus Drip brochure201 kB426
Download this file (Microbe plus Drip SDS.pdf)MicrobePlus Drip SDS94 kB414

Contact us directly

 

Growgreen Logo

For more information about us or our products:
phone +61 7 5463 9900
Free call 1800 355 913

Send us a message

6089 Cunningham Highway
Kalbar, Queensland 4309  Australia

Contact an Australian distributor

We have distributors in:
Queensland
New South Wales
Victoria
South Australia

Contact our head office for your nearest distributor
phone +61 7 5463 9900
Free call 1800 355 913
Send us a message

 
 
Back to top